Ulkoinen kiintolevy 2,5" USB3.1 SATA 5Gbps SSD-HDD kotelo-mekaaninen väri

USB3.1 SATA-kiintolevykotelo 2,5" mekaaninen SSD-HDD kotelo-läpinäkyvä väri

Yksi kovalevykotelo.

Yksi USB-tyypin C-kaapeli 30cm

1 kpl = 7 Euroa

5 kpl = 30 Euroa

Yhteensä 20 kiintolevykoteloa

------------------------------------------------------------------

Kiintolevykotelo käyttää JMS576-pääohjausta sekä UASP-kiihdytysprotokollaa,

ja sen suurin tukikapasiteetti on 6 Tt.

USB 3.1 -siirtonopeus on jopa 450 MB/s sekunnissa.

5 Gbps nopea siirto

---------------------------------------------------------

2.5 "HDD ULKOINEN KOTELO

Tekniset tiedot

USB-C 3.1 -liitäntä

5Gbps nopea tiedonsiirto

Tukee jopa 6TB:n kiintolevyjä

Super Slim I korkealaatuinen muovinen ABS

Sisääntulo: Sata I Lähtö: Sata I USB-C 3.1 Gen1

USB-C datakaapeli 30cm pituus

Ei ruuveja liian vapaa asennus

Tuki HDD / SSD paksuus 9.5mm tai alle

Tukee Windows, Mac, Linux

Plug&Play, ei tarvita ajuria

----------------------------------------

JMS576

USB 3.1 Gen1 to SATA 6Gb/s

Bridge Controller

Features

➢ Integrated USB Type-C

TM Multiplexer & Device CC control logic

➢ Complies with Gen2i/Gen2m of Serial ATA II Electrical Specification 2.6

➢ Complies with Gen3 of Serial ATA III Electrical Specification 3.2

➢ Complies with USB 3.1 Gen1 Specification, USB Mass Storage Class, Bulk-Only Transport

Specification

➢ Complies with USB Attached SCSI Protocol (UASP) Specification

➢ Supports USB Super-Speed/High-Speed/Full-Speed Operation

➢ Supports USB 2.0/USB 3.1 Gen1 power saving mode

➢ Supports SHA-1/SHA-256 for IEEE-1667 digest calculation

➢ Supports external SPI NVRAM for Vendor VID/PID of USB 2.0/USB 3.1 Gen1 device

controller

➢ Supports ATA/ATAPI PACKET command set

➢ 10 GPIOs for customization

➢ Provides hardware control PWM

➢ Provides software utilities for downloading the upgraded firmware code under USB 2.0/USB 3.1

Gen1

➢ Design for Windows 7, Windows 10 and MAC 10.10.5 or later version

➢ Supports 30MHz external crystal

➢ Embedded 5V to 1.2V voltage regulator

➢ Embedded 5V to 3.3V linear voltage regulator (LDO)

➢ QFN48 6x6 package

------------------------------------------------------------

JMS576

USB 3.1 Gen 1 to SATA 6Gb/s

Support TCPC controller/ UASP/ BOT

An integrated Type-C Multiplexer & Device CC control logic for Type-C storage solution

Download

Overview

JMS576 is a bridge controller with integrated USB Type-C Multiplexer & Device CC control logic for USB Type-C storage solution. It can support external SPI NVRAM for Vendor VID/PID of USB 2.0/USB 3.1 Gen1 device controller. JMS576 complies with both USB Mass Storage Class Bulk-Only Transport (BOT) Specification and USB Attached SCSI Protocol (UASP) Specification.

Key Features

Integrate USB Type-C Multiplexer & Device CC control logic

Comply with USB 3.1 Gen 1 Specification, USB Mass Storage Class, Bulk-Only Transport Specification

Comply with USB Attached SCSI Protocol (UASP) Specification

Support USB 2.0/USB 3.1 Gen 1 power saving mode

Support SHA-1/SHA-256 for IEEE-1667 digest calculation

Support external SPI NVRAM for Vendor VID/PID of USB 2.0/USB 3.1 Gen 1 device controller

Support ATA/ATAPI PACKET command set

------------------------------------------------------