Luxman Luxkit A-3600+A-3300 pääte ja etuvahvistin

Korkealaatuinen setti. Putki päätevahvistin ja putki etuvahvistin.

Huollettu. 100V laiteet ja 220v muuntaja mukaan.

Model Rating (A3600)

Type Bulb type stereo power amplifier kit

Continuous effective output 50W + 50W (4 , 8 , 16 )

Total harmonic distortion factor 0.5% or Less (50W, 1 kHz)

1% or Less (50W, 55 Hz to 10 kHz)

Frequency characteristic 10 Hz to 40 kHz - within 1 dB

Input sensitivity About 850 mv

Input impedance 80k

Damping factor 14 (8 , 1 kHz)

Residual noise 0.5 mV or less

Vacuum tube used 8045G : 4 pieces

6240G : 2 pieces

6AQ8 : 1

Power consumption 300W

400W (at rated output)

External dimensions Width 465x Height 168x Depth 206 mm

Weight 17.0kg

Model Rating(A-3300)

Type Tube type control amplifier kit

Output voltage Rating : 2 V (Distortion Factor 0.08% or Less)

Maximum : 15 v (0.5% strain rate)

Output impedance 950

Total harmonic distortion factor 0.08% or Less (Output 2 v)

Frequency characteristic 20 Hz to 20 kHz -0.5 dB

Input Sensitivity / Input Impedance

(at 1 V output) Phono1, 2 : 1.8mV/47k

Aux1, 2, 3 : 130mV/150k

Signal-to-noise ratio Phono1, 2 : 60 dB or more

Aux1, 2, 3 : 77 dB or more

Tone control LUX System NF Type with Bending Point Switching

Low-range bending point : 250 Hz, 500 Hz

High-frequency curve point : 2.5 kHz, 5 kHz

Filter Low-cut : 70 Hz (-6dB/oct.)

High Cut : 6 kHz (-6dB/oct.)

Attachment Headphone amplifier (output 50 mw)

Tape monitor circuit

Vacuum tube used 12AX7x4

12AU7x2

Semiconductor used 2SC735x4

2SA562x4

KB265x2

Power supply part External power supply system

A33 power supply or A3500/A2500

External dimensions Width 400x Height 130x Depth 245 mm

Weight 3.5kg