KD-X222PO 4K POH/HDBaseT/HDMI Extender (Tx/Rx KIT) - HDMI/LAN/HDMI

Lähempänä ammattikäyttölaadun täydellinen HDMI Extender -paketti. Käyttämätön. Ollut varalla.

Tarkemmat speksit:

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length

Power over HDBaseT: Tx unit powers Rx unit. Only one power connection needed.

Signal Extension:

Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling

Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT5e/6 UTP/STP cabling

Up to 250 ft. @ 1080p /1920x1200 using CAT6A cabling

Up to 230 ft. @ 1080p /1920x1200 using CAT5e/6 UTP/STP cabling

HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant

HDR (High Dynamic Range): HDR is achieved with AppleTV source at 4K/30 [4:2:2] 12bit deep color, enabling more life-like images through a greater range of luminance levels.

4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit

Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit

3D: Support for standard 3D stereoscopic signal formats

Low Profile: Super slim chassis design

HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s

EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx

Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices

Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control

IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block

Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units

RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector

Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status

Surround Sound Audio: Supports Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ multi-channel audio formats

CEC Support: For inter-device control between input and output HDMI channel

I2C Communication: EDID and HDCP authentication to Display and Source

Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.