Pioneer PL-30L mk2 puoliautomaattinen vinyylisoitin

Erinomaisessa kunnossa levysoitin. Täysin ehjä. Uusi Audio-technica äänirasia. 100V japanilainen laite ja muuntaja mukaan.

Commentary

In pursuit of sound quality, this record player system takes advantage of the excellent unit design just like high-end machines.

The tone arm uses a shell-integrated carbon graphite straight arm.

Through vibration analysis using a computer, the shape and balance with the least resonance can be determined theoretically, and through repeated measurement and listening, a tone arm that enables more faithful transmission has been realized.

In order to suppress low-frequency resonance caused by warping or eccentricity of the record, a silicon oil braking system (on-off capable) is adopted. By pressing the damping knob on the upper part of the arm shaft, the silicon braking fin injected into the oil cup sinks and applies viscous braking to the arm. In addition, by cutting the tip of the braking fin (ring shape) at 45 degrees, it is designed to apply braking suitable for both horizontal and vertical directions simultaneously. This suppresses harmful low-frequency resonance and reduces intermodulation distortion.

It uses silicon oil, which is excellent as a braking oil and has little viscosity change with time or temperature. In addition, this silicon oil is stored in an oil cup made with high precision to prevent oil from oozing out and improve reliability.

A heavy weight arm base made of die cast with a stabilizer effect is used for the arm base.

The drive section is equipped with an SH-rotor type coreless motor.

We have succeeded in greatly reducing the wow flutter by moving the rotor bearing, which used to be located at the bottom of the motor, just below the turntable, and by adopting a coreless structure that does not cause cogging in principle.

Starting torque is 1.3kg-cm and further 330kg-cm2By combining a turntable with an inertial mass (including a turntable seat), stability without load fluctuation is realized even with a load of 200g corresponding to 100 tone arms with a needle pressure of 2.0g.

In addition, three highly reliable Hall elements developed by Pioneer are used in the magnetic pole switching mechanism of the motor. In addition, fine noise is eliminated by requiring micron-order machining order of microns down to fine parts.

Adopts a silent lift-up mechanism that achieves quiet and accurate operation.

First of all, the arm is moved up and down using a moving coil system that applies the operation principle of a speaker and operates without contact with DC voltage.

In addition, to detect the end position of the recording sound groove, a method of non-contact detection using a Hall element mounted inside the arm shaft and a magnet mounted opposite the Hall element is adopted, which realizes stable operation without impairing the performance of the arm.

Equipped with a pure electronic quick stop mechanism that operates in conjunction with a silent lift-up mechanism and stops the turntable instantly.

We have adopted a high-density cabinet that effectively controls the shaking of the cabinet due to the anti-energy effect of the rotational moment of the turntable with high inertia and high torque.

In addition, by adopting a large insulator with a unique low center of gravity structure, the structure is resistant to external vibration.

By using a damping adjustment adapter (sold separately), it is possible to adjust the oil braking at a level of 0 to 5 as in the case of the advanced model PL-70LII and PL-50LII.

Includes an S-shaped replacement arm pipe (with large weight) for easy replacement of the head shell.

Also, carbon graphite shell integrated straight arm pipe is sold separately.

Model Rating

Type Cartridgeless player system

Phono Motor Section

Motor Coreless quartz PLL DC servo Hall motor

Drive system Direct drive

Bearing structure SH / rotor system

Turntable Diameter 31cm

Turntable inertia mass 330kg-cm2(including turntable seats)

Number of revolutions 33 1/3, 45 rpm

Rotational speed change Electronic with short stroke switch

Uneven rotation 0.011% or Less (WRMS/FG Direct Reading Method)

0.023% or Less (WRMS/JIS)

S/N 82 dB or more (DIN-B)

63 dB or More (JIS)

Load variation 0% (Needle Pressure 200g or Less)

Start-up characteristic 1/3 turn or less

Starting torque 1.3kg-cm

Speed detection method All-round integration method FG

Rotational speed deviation Not more than 0.002%

Drift Time drift : 0.00008% / h

Temperature drift : 0.00003% / ° C.

Brake mechanism Pure electronic

Tone Arm Section

Type Oil braking system static balance twin pipe exchange system pipe arm

Effective length 250mm

Overhang 12mm

Tracking error + 2.7 °, -1.3 °

Needle pressure adjustment Weight 1 rotation 1g

Applicable Cartridge Dead Weight Straight : 3g ~ 11g

S Shape : 6g ~ 32g (Including Shell)

Height adjustment range +3 -4mm

Head shell Carbon fiber composite material

Attachment mechanism Quartz lock indicator

Quick stop

Silent lift up (electronic)

Semiconductors used Quartz : 1

IC:10

Hall element : 3

LED:4

Transistor : 11

Diode : 6

Pwer 100 VAC, 50Hz/60Hz

Power consumption 13W

External dimensions Width 490x Height 180x Depth 401 mm

Weight 11.8kg