Kuvagalleria
Jyrsinkone 600х400
Tuotteen kuvaus
Kunto: Kuin uusi
Jyrsinkone on erinomaisessa kunnossa. Erittäin vähän käytetty. Työpöydän koko on 600 x 400 mm.
Description:
1. This CNC 6040T machine is suitable for industry, Technology Research,
Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.
2. It can work with various materials(metallic & non-metallic), such as: wood,
pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite
board plywood. and soft metal .like aluminum, copper and silver to engrave
them into 3D/2D works etc.
3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals,
bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...
5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
Cnc engraving machine parameters:
X,Y,Z Working Area:600(Y)*390（X）*120(Z)mm
Outside dimension:865*680*570mm（L*W*H）
Table size:770（Y）*490（X）mm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤100mm
Drive unit:
X axis:1605 Ball Screws
Y axis:1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit:
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor（tips：
1,The spindle motor must connect with the VFD.
2, It cannot directly connect with the supply voltage (AC110V).
3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension: 65*158mm
Material:304 stainless steel，Copper coil，Pressure cast aluminum pipe water jacket
VOLTS，current，power:AC220 /50Hz，5A,1.5KW VFD
Spindle speed: 24000 rpm
Max working frequency: 400Hz
Principal axis collet:ER11collet，Standard configuration: 6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions:G code / TAB files / nc file / NCC files
Communication interface:through parallel connection with computer
Software environment:windows XP / win7
Maximum speed：0-4000mm/min
Carving speed：0-2500mm/min(different materials differ
Installation tips：
The software perform better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
Control box parameters:
Operating Voltage：AC220V
Control unit：Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection：USB port OR PARALLEP port
Command code：G code
Acceptable software:EMC2
Protection：Emergency stop button
Käyttäjäprofiili
Kirjaudu sisään, jos haluat nähdä profiilin ja lähettää viestejä.
Kirjaudu sisäänIlmoituksen metatiedot
Viimeksi muokattu: 17.3.2025 klo 9.16 ・ Ilmoituksen tunnus: 20437167
