Denon DP-55M Vinyylisoitin UUSI KANSI

Ihan siisti ja täysin ehjä levysoitin. Huolto tehty tammikuussa 2024. Ihan uusi kansi.

Japanilainen 100V laite ja muuntaja mukaan.

Commentary

A record player corresponding to the manual machine of DP-55L.

It has built-in bi-directional servo that quickly responds to both increasing and decreasing speed changes and smooth electronic brake.

An AC servo motor is used as the drive motor.

An S-shaped tone arm is used for the tone arm.

In addition, the use of 60 mm thick large arm board reduces howling.

The cabinet has a wood grain finish.

Model Rating

Type Player system

Phono Motor Section

Drive system Bidirectional servo direct drive

Motor AC servo motor

Speed control Speed servo and phase servo by frequency detection

Number of revolutions 33 1/3, 45 rpm

Wow and flutter 0.015% W. rms or less (DENON measurement method)

0.002% W. rms or Less (JIS Measurement Method)

Rotational speed deviation 0.002% or less

Speed switching mechanism Soft Touch Push Button Type (Self-illumination Type)

Signal-to-noise ratio 78 dB or more (DIN-B)

Startup time Within 1.5 Seconds (33 1/3rpm)

Load characteristic 0% (Needle Pressure 100g Outer Circumference)

Voltage characteristic 0% for 90 ~ 110 V

Turntable Aluminum Die Cast 30 cm

Moment of inertia 200 kg / cm2(including turntable seats)

Arm Section

Type Static Balance S-Shaped / Universal with Damping

With Oil Dump Type Manual Lifter

Effective length 244mm

Overhang 14mm

Tracking error 2.5 degrees or less

Needle pressure control 1 Rotation 2.5g (1 Scale 0.1g)

Applicable Cartridge Dead Weight Approximately 15 ~ 19g (Including Shell, etc.)

Shell 9g (Equivalent to PCL-4)

Arm Height Adjustable Range Approx. 5 mm

Output code Low capacity cord, approx. 1.2m

Attachment mechanism Anti-skating mechanism

Cabinet Karin Nakagawa wood-grain finish 20 mm thick high density particle board

Pwer 100 VAC, 50Hz/60Hz

Power consumption 11W

External dimensions Width 485x Height 165x Depth 400 mm

Weight 11.5kg