Wago I/O module 750-600, 750-530, 750-601, 750-453, 750-430

Wago I/O module 750-600 End Module 750-530 8-channel digital output; 24 VDC; 0.5 A 750-601 Power Supply; 24 VDC; fuse holder 750-453 4-channel analog input; 0 … 20 mA; Single-ended 750-430

1x Wago 750-600

Type: 750-600

Height: 64mm

Length: 100mm

Width: 12mm

Max. ambient temperature: +55°C

Min. ambient temperature: 0°C

Dimensions: (l x w x h) 100 x 12 x 64 mm

Display: No

Manufacturer no.: 750-600

Type name: PLC terminal

1x Wago 750-530

This digital output module features eight channels in a width of just 12 mm (0.47 inch).

The module transmits control signals from an automation device to connected actuators.

All outputs are short-circuit-protected.

Field and system levels are electrically isolated.

x1 Wago 750-601

This supply module provides the I/O modules with the corresponding supply potential.

The maximum current provided by the supply module is 6.3 A. When configuring the system, the total current must not be exceeded. Should higher currents be necessary, an intermediate supply module must be added to the assembly.

This module is fuse-protected (5 x 20 mm). The fuse can be changed quickly, with ease, from the retractable fuse carrier.

A blown fuse is indicated by a LED.

x2 Wago 750-453

This analog input module processes standard 0–20 mA signals.

The input signal is electrically isolated and is transmitted with a resolution of 12 bits.

The internal system supply powers the module.

The input channels of the module have a common ground potential.

x4 Wago 750-430

This digital input module features eight channels in a width of just 12 mm (0.47 inch). It receives control signals from digital field devices (e.g., sensors).

Each input module has a noise-rejection filter.

Field and system levels are electrically isolated.

price here is per lot