WD 2TB HDD SATA3 kiintolevy (WDC WD20EARX-00PASB0) + HDD enclosure Icybox

WDC WD20EARX-00PASB0 HDD. Passed SMART extended test. About 6500 hours of usage.

Pickup in Sörnäinen, Helsinki. Mail delivery can be discussed.

I can add for 1 € an external HDD enclosure, Icybox IB-366StUS2-B (USB 2.0, eSATA, max 2 TB capacity), supports hot swap. Datasheet:

https://web.archive.org/web/20150419222236if_/http://raidsonic.de/data/datasheet/icybox/DE/datasheet_ib-366stus2-b_d.pdf

----

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.5-200.fc41.x86_64] (local build)

Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Western Digital Green

Device Model: WDC WD20EARX-00PASB0

Firmware Version: 51.0AB51

User Capacity: 2.000.398.934.016 bytes [2,00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Device is: In smartctl database 7.3/5528

ATA Version is: ATA8-ACS (minor revision not indicated)

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is: Mon Mar 10 09:54:47 2025 EET

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

AAM feature is: Unavailable

APM feature is: Unavailable

Rd look-ahead is: Enabled

Write cache is: Enabled

DSN feature is: Unavailable

ATA Security is: Disabled, NOT FROZEN [SEC1]

Wt Cache Reorder: Unknown

=== START OF READ SMART DATA SECTION ===

SMART Status not supported: Incomplete response, ATA output registers missing

SMART overall-health self-assessment test result: PASSED

Warning: This result is based on an Attribute check.

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 41) The self-test routine was interrupted

by the host with a hard or soft reset.

Total time to complete Offline

data collection: (40500) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 390) minutes.

Conveyance self-test routine

recommended polling time: ( 5) minutes.

SCT capabilities: (0x3035) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate POSR-K 200 200 051 - 624

3 Spin_Up_Time POS--K 175 164 021 - 6233

4 Start_Stop_Count -O--CK 100 100 000 - 188

5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0

7 Seek_Error_Rate -OSR-K 200 200 000 - 0

9 Power_On_Hours -O--CK 094 094 000 - 4932

10 Spin_Retry_Count -O--CK 100 100 000 - 0

11 Calibration_Retry_Count -O--CK 100 100 000 - 0

12 Power_Cycle_Count -O--CK 100 100 000 - 127

192 Power-Off_Retract_Count -O--CK 200 200 000 - 100

193 Load_Cycle_Count -O--CK 185 185 000 - 45318

194 Temperature_Celsius -O---K 128 098 000 - 22

196 Reallocated_Event_Count -O--CK 200 200 000 - 0

197 Current_Pending_Sector -O--CK 200 200 000 - 0

198 Offline_Uncorrectable ----CK 200 200 000 - 5

199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0

200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 5

||||||_ K auto-keep

|||||__ C event count

||||___ R error rate

|||____ S speed/performance

||_____ O updated online

|______ P prefailure warning

General Purpose Log Directory Version 1

SMART Log Directory Version 1 [multi-sector log support]

Address Access R/W Size Description

0x00 GPL,SL R/O 1 Log Directory

0x01 SL R/O 1 Summary SMART error log

0x02 SL R/O 5 Comprehensive SMART error log

0x03 GPL R/O 6 Ext. Comprehensive SMART error log

0x06 SL R/O 1 SMART self-test log

0x07 GPL R/O 1 Extended self-test log

0x09 SL R/W 1 Selective self-test log

0x10 GPL R/O 1 NCQ Command Error log

0x11 GPL R/O 1 SATA Phy Event Counters log

0x80-0x9f GPL,SL R/W 16 Host vendor specific log

0xa0-0xa7 GPL,SL VS 16 Device vendor specific log

0xa8-0xb7 GPL,SL VS 1 Device vendor specific log

0xbd GPL,SL VS 1 Device vendor specific log

0xc0 GPL,SL VS 1 Device vendor specific log

0xc1 GPL VS 93 Device vendor specific log

0xe0 GPL,SL R/W 1 SCT Command/Status

0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)

Device Error Count: 635 (device log contains only the most recent 24 errors)

CR = Command Register

FEATR = Features Register

COUNT = Count (was: Sector Count) Register

LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8

LH = LBA High (was: Cylinder High) Register ] LBA

LM = LBA Mid (was: Cylinder Low) Register ] Register

LL = LBA Low (was: Sector Number) Register ]

DV = Device (was: Device/Head) Register

DC = Device Control Register

ER = Error register

ST = Status register

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

SMART Extended Self-test Log Version: 1 (1 sectors)

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Extended offline Interrupted (host reset) 90% 4920 -

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3

SCT Version (vendor specific): 258 (0x0102)

Device State: Active (0)

Current Temperature: 22 Celsius

Power Cycle Min/Max Temperature: 21/23 Celsius

Lifetime Min/Max Temperature: 18/52 Celsius

Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2

Temperature Sampling Period: 1 minute

Temperature Logging Interval: 1 minute

Min/Max recommended Temperature: 0/60 Celsius

Min/Max Temperature Limit: -41/85 Celsius

Temperature History Size (Index): 478 (97)

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)

ID Size Value Description

0x0001 2 0 Command failed due to ICRC error

0x0002 2 0 R_ERR response for data FIS

0x0003 2 0 R_ERR response for device-to-host data FIS

0x0004 2 0 R_ERR response for host-to-device data FIS

0x0005 2 0 R_ERR response for non-data FIS

0x0006 2 0 R_ERR response for device-to-host non-data FIS

0x0007 2 0 R_ERR response for host-to-device non-data FIS

0x000a 2 3 Device-to-host register FISes sent due to a COMRESET

0x000b 2 0 CRC errors within host-to-device FIS

0x8000 4 42506 Vendor specific