Aphex 124A linjasovitin

Kaksisuuntainen tasonkorjaus ja balansointivahvistin. 2 kanavaa, RCA ja XLR liittimet.

-10dB/+4dB/-10dB XLR / RCA liittimet.

Yleisradiolaatua, HiFi laitteiden liittämiseksi äänipöytään.

Yksi osa on puoli räkkileveyttä. Näitä on kaksi sekä Räkkiasennussarja

Made in USA.

The Industry Standard for Interconnecting Consumer and Pro Level Stereo Audio Equipment

Allows use of consumer (-10dBv) gear with pro (+4 or +8dBm) systems

Two-way buffer so consumer and pro systems can operate properly

Acts as a signal splitter, providing two high quality balanced outs from an unbalanced "Y" connector

A Clean and Reliable Solution for Bidirectional Level and Impedance Matching

The Aphex Model 124B Audio Level Interface is designed to allow use of -10dBV consumer hi-fi equipment with +4 or +8dBm professional/industrial/broadcast audio systems. It provides an extremely clean, reliable two-way buffer so both systems can operate at maximum performance levels, matching impedances and operating levels.

Input

Servo-balancing means that high common mode voltages, such as induced hum from a nearby AC line, are compensated for to preserve headroom. The input impedance of 100K Ohms allows bridging over a 600 Ohm balanced or unbalanced line with negligible loading effects. Front panel switchable 600 Ohm load allows for input line termination when required.

The Industry Standard for Interconnecting Consumer and Pro Level Stereo Audio Equipment

Allows use of consumer (-10dBv) gear with pro (+4 or +8dBm) systems

Two-way buffer so consumer and pro systems can operate properly

Acts as a signal splitter, providing two high quality balanced outs from an unbalanced "Y" connector

A Clean and Reliable Solution for Bidirectional Level and Impedance Matching

The Aphex Model 124B Audio Level Interface is designed to allow use of -10dBV consumer hi-fi equipment with +4 or +8dBm professional/industrial/broadcast audio systems. It provides an extremely clean, reliable two-way buffer so both systems can operate at maximum performance levels, matching impedances and operating levels.

Input

Servo-balancing means that high common mode voltages, such as induced hum from a nearby AC line, are compensated for to preserve headroom. The input impedance of 100K Ohms allows bridging over a 600 Ohm balanced or unbalanced line with negligible loading effects. Front panel switchable 600 Ohm load allows for input line termination when required